|Material to be processed || Wet, clean from clay and slurries, classified (fineness from separated class is 5 % max., crushing from separated class is 10% max.) |
|Material grain size fraction || – 50 + 20, – 20 + 10, – 10 + 5 mm. |
|Material supply and transportation system || Continuous flow system, single-stage (with gravity feeder.
Non-single layer supply of material to the analysis area is allowed.
| Throughput (maximum) || 100 t/h (– 50 + 20 mm
60 t/h (– 20 + 10 mm)
30 t/h (– 10 + 5 mm)
| X-ray: |
|number of X-ray tubes || 2
Single-sided exposure on material flow by two X-ray tubes; at first, in the tray (preliminary "pumping"), then in the freefall tray in detection area.
|mode of radiation || Pulse type (pulse duration - 0.5 ms; pulse period - 4 ms) |
|anode voltage, anode current || (33-2) kV max.; (330±10) mA |
| Detection: |
| Two-sided material luminescence detection.
Each receiver is provided with an optic system to localize the detection area; so, the material flow is divided across the width into four detection areas.
Analogue-to-Digital Processing System; operation both in amplitude-time mode and in special mode (increased selectivity, using kinetic features of luminescence) is possible.
|luminescent signals' receivers ||photomultiplier tubes (PMT) |
| number of detectors, detection channels ||8 (4 on each side of the material flow). |
| Ejection ||Pneumatic, with compressed air, by means of solenoid-operated pneumatic valves.
5-channel stopping mechanism. The valves are actuated according to the certain algorithm depending on detection area, where the object was detected.
| Recovery rate||98% minimum |
| Yield per ejection (with rated capacity) ||Max. 1.0 kg (- 50 + 20 mm)
0.65 kg (– 20 + 10 mm)
0.4 kg (– 10 + 5 mm)
| Automation ||Checking of main systems prior to start of material supply and in the course of operation (material supply is stopped if fault is detected). Sensitivity control. Failure indication. Monitoring and control from the APCS of enrichment plant.
Protection system against unauthorized access to SM, material only if special smart cards are available.
| Electric power supply ||1 phase; (220±22) V; (50±1) Hz |
| Power consumption ||6 kVA max|
| Transportation water flowrate (0.015 MPa) ||30 l/min minimum |
| Flowrate of potable water to cool the tubes ||6 l/min minimum |
| Flowrate of potable water to wash the windows of photo receptors and tube collimators (0.3 MPa) ||0.5 l/min max. |
| Average compressed air flowrate ||30 l/min |
| Overall dimensions (L×W×H), mass: |
| SM ||2300×845×2300 mm; 1100 kg |
| ACR ||765×555×1745 mm; 230 kg |
| Operation Conditions: |
| Ambient air temperature ||from +10°C to +35°C|
| Relative humidity (at ambient air temperature + 25°С)||SM – to 100% ACR – to 80% |
| Protection against X-rays ||Specially designed construction of the sorter totally protects against the X-ray. Each unit is being tested for safety.|