Optical Emission Spectrometry EMIS-3
Technical data
Elements under analysis |
Ca, Mg, Na, K, Al, Ag, Cu, Zn, Mn, Li, Sr, Ni, Fe, Pb, Cd and other
|
Limit of detection depending on element under analysis and object matrix, mg/dm3 |
0,005 (Cu)
0,05 (Zn)
0,02 (Na)
0,02 (Са)
and other
|
Average time of one measurement in continuous-flow system, sec |
60
|
Spectral range depending on set of analyzed elements, nm |
200 - 800
|
Water (sample) flowrate in flow cells, l/h |
0.8
|
Power supply voltage (50 Hz), V |
220
|
Power consumption, VA |
500
|
Weight, kg |
83
|
Process diagram

Principle of Operation
Principle of analyzer operation is based on the excitation of emission radiation of atoms of chemical elements being under examination by means of local electric discharge in analized water with the subsequent recording and processing of radiation spectrum. Intensity of the emission radiation lines of any element is proportional to its concentration in analized water.